On June 21, Cloudflare automatically mitigated a highly volumetric DDoS attack that peaked at 754 million packets per second. The attack was part of an organized four day campaign starting on June 18 and ending on June 21: attack traffic was sent from over 316,000 IP addresses towards a single Cloudflare IP address that was mostly used for websites on our Free plan. No downtime or service degradation was reported during the attack, and no charges accrued to customers due to our unmetered mitigation guarantee.
The attack was detected and handled automatically by Gatebot, our global DDoS detection and mitigation system without any manual intervention by our teams. Notably, because our automated systems were able to mitigate the attack without issue, no alerts or pages were sent to our on-call teams and no humans were involved at all.
Attack Snapshot – Peaking at 754 Mpps. The two different colors in the graph represent two separate systems dropping packets.
During those four days, the attack utilized a combination of three attack vectors over the TCP protocol: SYN floods, ACK floods and SYN-ACK floods. The attack campaign sustained for multiple hours at rates exceeding 400-600 million packets per second and peaked multiple times above 700 million packets per second, with a top peak of 754 million packets per second. Despite the high and sustained packet rates, our edge continued serving our customers during the attack without impacting performance at all
The Three Types of DDoS: Bits, Packets & Requests
Attacks with high bits per second rates aim to saturate the Internet link by sending more bandwidth per second than the link can handle. Mitigating a bit-intensive flood is similar to a dam blocking gushing water in a canal with limited capacity, allowing just a portion through.
Bit Intensive DDoS Attacks as a Gushing River Blocked By Gatebot
In such cases, the Internet service provider may block or throttle the traffic above the allowance resulting in denial of service for legitimate users that are trying to connect to the website but are blocked by the service provider. In other cases, the link is simply saturated and everything behind that connection is offline.
Swarm of Mosquitoes as a Packet Intensive DDoS Attack
However in this DDoS campaign, the attack peaked at a mere 250 Gbps (I say, mere, but ¼ Tbps is enough to knock pretty much anything offline if it isn’t behind some DDoS mitigation service) so it does not seem as the attacker intended to saturate our Internet links, perhaps because they know that our global capacity exceeds 37 Tbps. Instead, it appears the attacker attempted (and failed) to overwhelm our routers and data center appliances with high packet rates reaching 754 million packets per second. As opposed to water rushing towards a dam, flood of packets can be thought of as a swarm of millions of mosquitoes that you need to zap one by one.
Zapping Mosquitoes with Gatebot
Depending on the ‘weakest link’ in a data center, a packet intensive DDoS attack may impact the routers, switches, web servers, firewalls, DDoS mitigation devices or any other appliance that is used in-line. Typically, a high packet rate may cause the memory buffer to overflow and thus voiding the router’s ability to process additional packets. This is because there’s a small fixed CPU cost of handing each packet and so if you can send a lot of small packets you can block an Internet connection not by filling it but by causing the hardware that handles the connection to be overwhelmed with processing.
Another form of DDoS attack is one with a high HTTP request per second rate. An HTTP request intensive DDoS attack aims to overwhelm a web server’s resources with more HTTP requests per second than the server can handle. The goal of a DDoS attack with a high request per second rate is to max out the CPU and memory utilization of the server in order to crash it or prevent it from being able to respond to legitimate requests. Request intensive DDoS attacks allow the attacker to generate much less bandwidth, as opposed to bit intensive attacks, and still cause a denial of service.
Automated DDoS Detection & Mitigation
So how did we handle 754 million packets per second? First, Cloudflare’s network utilizes BGP Anycast to spread attack traffic globally across our fleet of data centers. Second, we built our own DDoS protection systems, Gatebot and dosd, which drop packets inside the Linux kernel for maximum efficiency in order to handle massive floods of packets. And third, we built our own L4 load-balancer, Unimog, which uses our appliances’ health and other various metrics to load-balance traffic intelligently within a data center.
In 2017, we published a blog introducing Gatebot, one of our two DDoS protection systems. The blog was titled Meet Gatebot – a bot that allows us to sleep, and that’s exactly what happened during this attack. The attack surface was spread out globally by our Anycast, then Gatebot detected and mitigated the attack automatically without human intervention. And traffic inside each datacenter was load-balanced intelligently to avoid overwhelming any one machine. And as promised in the blog title, the attack peak did in fact occur while our London team was asleep.
So how does Gatebot work? Gatebot asynchronously samples traffic from every one of our data centers in over 200 locations around the world. It also monitors our customers’ origin server health. It then analyzes the samples to identify patterns and traffic anomalies that can indicate attacks. Once an attack is detected, Gatebot sends mitigation instructions to the edge data centers.
To complement Gatebot, last year we released a new system codenamed dosd (denial of service demon) which runs in every one of our data centers around the world in over 200 cities. Similarly to Gatebot, dosd detects and mitigates attacks autonomously but in the scope of a single server or data center. You can read more about dosd in our recent blog.
The DDoS Landscape
While in recent months we’ve observed a decrease in the size and duration of DDoS attacks, highly volumetric and globally distributed DDoS attacks such as this one still persist. Regardless of the size, type or sophistication of the attack, Cloudflare offers unmetered DDoS protection to all customers and plan levels—including the Free plans.